RAILS AND OTHER EQUIPMENT

Rail system

The JH MiniStrø robots drives on rails IPE 100-160 depending on the weight of the robot.

The robot can also pass through 90o degree curves and rail switches. The rail is mounted on trusses or on the inventory in the stable.

On the under side of the rail markers are attached, after which the robot orient itself.

It is rarely necessary to strengthen the trusses in the stable, when installing a JH MiniStrø system.

Automatic doors

If the robot has to operate in several buildings, automatic doors can be installed. The doors maintain

temperature and other conditions in the stable. The automatic doors works also in combination with fire doors. The doors are controlled from the robot.

Automatic rail lifting

In many stables the feed alley must be accessible for tractors or similar.

The rails of the JH MiniStrø system can make this difficult.

For this the automatic rail lifting system has been developed. The lifting/lowering of the rail that crosses the feed alley is controlled automatically by the robot or manually with a remote control.