FILLING STATIONS

A JH MiniStrø robot can retrieve material from up to 4 different filling stations.
For example. from a mixer and a straw ripper for combined feeding and littering.

JH Bale Opening Device

The ball opening device is available for different bale sizes. The bales can be loaded from three sides.

In the device alone fits one bale of straw, but the device can be combined with an additional feeder table, on which several bales can be stored.

On the device the JH Straw Chopper can be mounted to cut straw down to 2 cm at low voltage for a very fine material to be used in the robot.

JH Dosing Devices for Loose Material

The 2/5, and 9m³ bunkers for chopped straw and/or sawdust are simple but sturdy constructions.

They consist of an inclined bottom and a conveyor chain. The devices have a top shredder, which doses the bedding material into the robot

Sand dosing

For the storage and dosing of sand in the robot. The device can contain 7 m³ sand.

The sand is filled in the robot via a rubber band. In the device can be stored enough sand for about one week.

A hydraulic lid is offered separately for outside locations.

Mixer

The JH MiniStrø vertical mixer allows the feeding of roughage such as corn silage to sows and egg-laying hens.

The mixing container of the mixer has a powerful, vertical screw for mixing the material and knives to cut it.

The mixer is available in different sizes.